|
|||||||
| Networking Use this board for problem solving and the discussion of Networking, router, and Wi-Fi issues |
 |
|
|
Topic Tools |
|
#1
November 14th, 2005, 04:14 AM
|
|||
|
|||
|
D-Link DI-524 won't let me telnet
I recently switched from a Linksys router to the D-Link DI-524 so I could have wireless. I have one machine that runs a webserver plus mail, FTP, news, and Shoutcast. I had no problem setting up port forwarding for all that and it works fine. I also have Scrabble and ICQ set up for this machine. No problems. But when I try to telnet into an external site using Windows Telnet, Putty, WinQVT, it won't connect. I don't think I needed to, but I opened up port 23 both ways as well. I didn't have the problem with the Linksys. If I bypass the router, it works fine. I'm running XP-SP2 and Zone Alarm. The clients are all set to "allow" in Zone Alarm and I've even tried turning ZA off altogether. With a direct connection it works fine with ZA turned on.
Any ideas? 
|
|
#2
November 14th, 2005, 05:52 AM
|
|||
|
|||
|
You shouldn't need to forward or open ports to telnet out. If you don't mind can you post the telnet address you are trying to telnet to. Also what are the firewall setting used in the dlink router?
|
|
#3
November 14th, 2005, 06:12 AM
|
|||
|
|||
|
D-Link DI-524 won't let me telnet
Firewall settings....
http://www.mewnlite.com/di-firewall.gif I'm telnetting worf.netins.net or 167.142.225.4 Tried it both ways.
|
|
#6
November 14th, 2005, 06:49 AM
|
|||
|
|||
|
Does that router do logging? If so enable it if not already and try to telnet a few times. When done open the log file and see if you can tell by it whats blocking the telnet session. It may not show us much but it may just pin point the problem. I'm still looking over the firewall settings and doing about five hundred things at once so hang in there we will get it worked out.
|
|
#7
November 14th, 2005, 07:16 AM
|
|||
|
|||
|
Not much in the log... nothing to coincide with my attempts to telnet
http://www.mewnlite.com/log.gif The times are 2 hours off. I had reset it at about 3 PM and even though I've been quite active, there's nothing much in the log. Meanwhile, I have to log in to bed... big day tomorrow. Thanks for helping me... I'll check back in the morning.
|
|
#8
April 2nd, 2007, 02:11 AM
|
|||
|
|||
|
same problem here
i have a dlink 524 rev.D wireless wouter i can't telnet 524, but i can successfully telnet my repotec DSL modem after some googling, it sounds like 524 is not a Telnet-enabled device 
|
|
| Bookmarks |
«
Previous Topic
|
Next Topic
»
|
|
Similar Topics
|
||||
| Topic | Topic Starter | Forum | Replies | Last Post |
| telnet error | Gpvistan | Networking | 5 | May 14th, 2005 03:51 PM |
| Good Ol Telnet | dabigmooish | Internet / Browsers | 0 | August 6th, 2004 11:50 PM |
| Microsoft Telnet?? | TonyV | Windows XP | 6 | July 5th, 2004 03:46 AM |
| Telnet in Win2000 | gsanta | Windows NT, 2000, 2003, 2008, 2012 | 4 | May 30th, 2001 07:48 PM |
| TELNET ? | Tobmello | Networking | 2 | February 16th, 2001 08:36 PM |
All times are GMT +1. The time now is 06:48 AM.