Damn Small Linux wont Connect

[willgrass]

I am unable to connect Damn Small Linux 4.2.5 to my Bthomehub router. I have tried what I have in the below text but to no avail; maybe I am going the wrong way here.
As I know little of Linux I am getting desperate so for any information I would be grateful.


Beaver Terminal
Lspci
00:00.0 HOST BRIDGE: INTEL CORPORATION 82830 830 CHIPSET HOST (REV 02)
00:01.0 PCI BRIDGE: INTEL CORPORATION 82830 830 CHIPSET AGP BRIDGE (REV 02)
00:1D.0 USB CONTROLLER: INTEL CORPORATION 8201CA/CAM USB CONTROLLER #1 (REV 01)
00:1E.0 PCI BRIDGE: INTEL CORPORATION 82801 MOBILE PCI BRIDGE (REV 41)
00:1F.0 ISA BRIDGE: INTEL CORPORATION 82801CAM ISA BRIDGE (LPC) (REV 01)
00:1F.1 IDE INTERFACE: INTEL CORPORATION 82801CAM IDE U100 CONTROLLER (REV 01)
00:1F.5 MULTIMEDIA AUDIO CONTROLLER: INTEL CORPORATION 82801CA/CAM AC’97 AUDIO
CONTROLLER (REV 01)
00:IF.6 MODEM: INTEL CORPORATION 82801CA/ CAM AC’97 MODEM CONTROLLER (REV 01)
01:00.0 VGA COMPATIBLE CONTROLLER: ATI TECHNOLOGIES INC RADEON MOBILITY M6 LY
02::00.0 ETRHERNET CONRTOLLER: 3COM CORPORATION 3C905C – TX/TX - M (TORNADO) (REV 78)
02:01.0 CARDBUS BRIDGE: TEXAS INSTRUMENTS PCI1420 PC CARD CARDBUS CONTROLLER
02:01.1 CARDBUS BRIDGE: TEXAS INSTRUMENTS PCI1420 PC CARD CARDBUS CONTROLLER
04:00:0 NETWORK CONTROLLER: RALINK RT2500 802.11G CARDBUS/MINI-PCI (REV 01)

prism2 setup

device wlan0 Left as it is
channel 11 Already in the box don’t know if it is correct. Tried 1and 6
sid BThomeHub-7D1C My router model
wep 47:38:db:a8:83 This is my Key Number but not sure about how to do hex maybe I am wrong here.

[kage]

Open a root terminal in DSL, run the command "ifconfig -a" and post the output here.

Is your wireless router using encryption?

[willgrass]

iconfig could not get anything with iconfig-a

wep encryption is on

lo LINK ENCAP:LOCAL LOOPBACK
INET ADDR:127.0.0.1 MASK:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 METRIC :1
RX PACKETS:2 ERRORS:0 DROPPED:0 OVERRUNS:0 FRAME:0
TX PACKETS:2 ERRORS:0 DROPPED:0 OVERRUNS:0 CARRIER:0
COLLISIONS:0 TEXQUEUELEN:0
RX BYTES:100 (100.0 B) TX BYTES:100.0 (100.0B)


Thanks for the reply

[kage]

iconfig could not get anything with iconfig-a

"ifconfig -a" as in: ifconfig<space>-a

[willgrass]

iconfig could not get anything with iconfig-a

wep encryption is on

lo LINK ENCAP:LOCAL LOOPBACK
INET ADDR:127.0.0.1 MASK:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 METRIC :1
RX PACKETS:2 ERRORS:0 DROPPED:0 OVERRUNS:0 FRAME:0
TX PACKETS:2 ERRORS:0 DROPPED:0 OVERRUNS:0 CARRIER:0
COLLISIONS:0 TEXQUEUELEN:0
RX BYTES:100 (100.0 B) TX BYTES:100.0 (100.0B)


iconfig _a

etho LINK ENCAP:ETHERNET HWADDR 00:06:5B:37:1E:6A
BROADCAST MULTICAST MTU:1500 METRIC:1
RX PACKETS:0 ERRORS:0 DROPPED:0 OVERRUNS:0 FRAME:0
TX PACKETS:6 ERRORS:0 DROPPED:0 OVERRUNS:0 CARRIER:6
COLLISIONS:0 TEXQUEUELEN:1000
RX BYTES:0 (0.0 B) TX BYTES:2052. (2.0 KIB)
INTRUPTED:11 BASE ADDRESS:0XEC80

In wish I could copy and paste but it does not seem possible so am using another laptop to type the information across.


Thanks again