Cannot boot windows - Startup repair cannot repair this computer automatically....jxl
HELP !!!
I have an Acer desktop running Windows 7 SP1. When I try to start it up I get the Windows Error Recovery screen – Windows failed to start.
I launched the recovery option it runs for about 20 mins with the message Startup Repair cannot repair the computer automatically.
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 382
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: 0x7f
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Startup Repair Diagnosis and Repair Log displays the following details:
Last successful boot time: 7/29/2016 09:50:09 PM(GMT)
Number of repair attempts: 1
Session details
System Disk = \Device\Harddisk0
Windows directory = C\Windows
AutoChk Run = 0
Number of root causes = 1
Test Performed:
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0ms
Test Performed:
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0ms
Test Performed:
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 63 ms
Test Performed:
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken 484 ms
Test Performed:
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0ms
Test Performed:
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 93 ms
Test Performed:
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms
Test Performed:
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
Name: Boot status test
Result: Completed successfully. Error code = 0x0
Time taken = 358 ms
Test Performed:
Name: Registry hives test
Result: Completed successfully. Error code = 0x0
Time taken = 2450 ms
Test Performed:
Name: Setup state check
Result: Completed successfully. Error code = 0x0
Time taken = 32 ms
Test Performed:
Name: Windows boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
Name: Bugcheck analysis
Result: Completed successfully. Error code = 0x0
Time taken = 702 ms
Root cause found:
Unknown Bugcheck: Bugcheck 7f. Parameters = 0xd, 0x0, 0x0, 0x0
Repair action: System files integrity check and repair
Result: Failed. Error Code = 0x490
Time Taken = 600152
------------------------------------------
I have tried it a number of times. I have seen two other errors during this:
BSOD STOP 0X0000007F and I was able to get into SAFE MODE a couple of time with one showing me FAILURE CONFIGURING WINDOWS UPDATES. REVERTING CHANGES. First time it just shutdown the system. I went back into Safe Mode and the reverting changes ran for about 30 mins and started Safe mode .
I read a number of recovery attempts but all seem a little different and I am not sure what recovery attempt I should try without cause more problems.
I would appreciate some help, please.
|