Go Back   Cyber Tech Help Support Forums > Operating Systems > Windows 7

Notices

Reply
 
Topic Tools
  #1  
Old October 27th, 2018, 07:45 AM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
PC is doing strange things

Three days ago When I booted up my pc windows didn't come up. My monitor just kept flashing Acer. But after several attempts it came up. Next time I booted up it came up that windows could not start and was given the option to find the problem. It came up with Recovery could not fix the problem.
Programs keep hanging and (Not Responding) It has froze up a few times. I ran my anti-virus and it didn't find anything. I'm afraid if I shut it down it won't come back up. I went to the admin event log and it was full of errors. Here are a few of the repeating ones:

Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x74D435FAD756. The following error occurred: 0x6F. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
8 user registry handles leaked from \Registry\User\S-1-5-21-1448708669-323945309-3416342945-1000:
Process 116 (\Device\HarddiskVolume2\Windows\System32\svchost. exe) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software\Policies\Microsoft\Windows\CurrentVe rsion\Internet Settings
Process 116 (\Device\HarddiskVolume2\Windows\System32\svchost. exe) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software\Policies
Process 116 (\Device\HarddiskVolume2\Windows\System32\svchost. exe) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software
Process 1448 (\Device\HarddiskVolume2\Program Files\Common Files\Microsoft Shared\Windows Live\WLIDSVC.EXE) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software\Microsoft\SystemCertificates\Root
Process 116 (\Device\HarddiskVolume2\Windows\System32\svchost. exe) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software\Microsoft\Internet Explorer\Main
Process 116 (\Device\HarddiskVolume2\Windows\System32\svchost. exe) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software\Microsoft\Windows\CurrentVersion\Int ernet Settings
Process 116 (\Device\HarddiskVolume2\Windows\System32\svchost. exe) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software\Microsoft\Windows\CurrentVersion\Int ernet Settings
Process 116 (\Device\HarddiskVolume2\Windows\System32\svchost. exe) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software\Microsoft\Internet Explorer\Main\FeatureControl

Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.

DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1448708669-323945309-3416342945-1000:
Process 2376 (\Device\HarddiskVolume2\Windows\explorer.exe) has opened key \REGISTRY\USER\S-1-5-21-1448708669-323945309-3416342945-1000\Software\Microsoft\Internet Explorer\Desktop\General


The device, \Device\Harddisk0\DR0, has a bad block.

Name resolution for the name isatap.attlocal.net timed out after none of the configured DNS servers responded.

Volume Shadow Copy Service error: Volume/disk not connected or not found. Error context: CreateFileW(\\?\GLOBALROOT\Device\HarddiskVolumeSh adowCopy190,0xc0000000,0x00000003,...).

Operation:
Processing PostFinalCommitSnapshots

Context:
Execution Context: System Provider

The scheduled restore point could not be created. Additional information: (0x80042308).

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

Windows 7 Professional Service Pack 1
8 GB ram
64 bit
2 tb HD
Processor: Intel Core (TM)2 Quad CPU Q9650 @3.00GHz
AMD Radeon

Thanks kuzzz
Reply With Quote


  #2  
Old October 27th, 2018, 07:15 PM
renegade600's Avatar
renegade600 renegade600 is offline
Certifiable Bum
 
Join Date: Sep 2003
O/S: Linux
Location: Osceola, Ar
Posts: 26,456
did you try restoring to a previously saved restore point prior to the problem.
Reply With Quote
  #3  
Old October 27th, 2018, 08:32 PM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
Yes but there were no Restore dates not even the automatic store points. This error showed up many times in the Admin Events log" The scheduled restore point could not be created. Additional information: (0x80042308)

kuzzz
Reply With Quote
  #4  
Old October 28th, 2018, 01:36 AM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
Here's something strange. When I was optimizing one of my external drives it got stuck on this folder named: G:\found.000\file0001.chk so I had it skip it. I'm running a full system scan and my anti-virus is stuck on the same file. And the folder is locked so I can't delete it.
Reply With Quote
  #5  
Old October 28th, 2018, 11:36 AM
IPR512's Avatar
IPR512 IPR512 is offline
Jill
 
Join Date: May 2006
O/S: Windows 10 Pro
Location: Tampabay area of Florida
Posts: 2,277
See if this helps.
https://www.howtogeek.com/282798/wha...le-in-windows/
Reply With Quote
  #6  
Old October 29th, 2018, 06:47 PM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
how do you clear your browser cache?

kuzzz
Reply With Quote
  #7  
Old October 31st, 2018, 06:59 AM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
I was on the phone with norton going through my pc used norton eraser and did full system
scan and I don't have a virus or malware. But when I went to boot up windows didn't start so I tried a couple more times and finally I got the windows failed to start up so I ran repair and it finally came up. Should I reinstall windows?

kuzzz
Reply With Quote
  #8  
Old November 1st, 2018, 07:06 PM
Jintan's Avatar
Jintan Jintan is offline
Cyber Tech Help Moderator
 
Join Date: Dec 2004
Posts: 51,851
Howdy folks. kuzzz, your hard drive has problems.

When Windows first boots up, if it finds file system errors, it runs check disk to repair the system. This creates file copes stored in folders like this:

G:\found.000\file0001.chk

All those Registry errors suggest problems with the hive files (also part of the file system).

And "The device, \Device\Harddisk0\DR0, has a bad block." says your drive has problems.

So if you don't already have copies saved, offload copies of all the personal files you want to keep.


The drive may be repairable.

In the search box next to the Start button, type cmd

When cmd.exe shows at the top of the search display, right click it, and run it as admin. When the command window opens, type:

chkdsk /r

and hit Enter.

It should tell you the volume is in use, and allow you to opt to run check disk on reboot. Type Y and hit Enter, then restart the computer.

Check disk will run during reboot. If you watch it, you will see it return file fragments and other file system repairs. Because it is being run with the /r switch, it will also find bad sectors, move info from them, and mark them as bad so they won't be reused again.

After the reboot, use the computer for a while, including an extra reboot, then open the command window again (admin) and type:

chkdsk

and hit Enter.This time check disk will run without effecting any repairs. It will stop if cannot continue because it needs to make repairs, which suggests the file system is corrupt again, which shouldn't happen on an okay drive. If it finishes and finds no errors, you make be okay for now. Bit will want to run chkdsk often to be sure.
Reply With Quote
  #9  
Old November 2nd, 2018, 01:47 AM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
Thank you I'll start moving things over to one of my other drives then do as you suggest.

kuzzz
Reply With Quote
  #10  
Old November 2nd, 2018, 12:32 PM
Jintan's Avatar
Jintan Jintan is offline
Cyber Tech Help Moderator
 
Join Date: Dec 2004
Posts: 51,851
One other option that might be better than check disk is to use AOMEI Partition Assistant to run the disk check. It also uses check disk, but if I recall correctly, also gives a report. Check disk itself does provide a report of sorts on first reboot after running it, but it's not easy to find among the error logs, and even harder to make sense of.

AOMEI Partition Assistant also can be used to easily clone your drive, if the drive isn't too bad off. And it's free to use for home users.
Reply With Quote
  #11  
Old November 3rd, 2018, 04:18 AM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
will AOMEI Partition Assistant also fix errors or just report them? Or would I run it after chkdsk /r? I've just about got every thing I want off my C drive. Should I disconnect my external drives while I do this?
Thanks
kuzzz
Reply With Quote
  #12  
Old November 3rd, 2018, 10:46 PM
Jintan's Avatar
Jintan Jintan is offline
Cyber Tech Help Moderator
 
Join Date: Dec 2004
Posts: 51,851
Aomei uses check disk, and fixes errors if you tell it to. No need to disconnect other drives.
Reply With Quote
  #13  
Old November 4th, 2018, 02:27 AM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
ok thanks keep your fingers crossed for me.

kuzzz
Reply With Quote
  #14  
Old November 11th, 2018, 11:15 AM
IPR512's Avatar
IPR512 IPR512 is offline
Jill
 
Join Date: May 2006
O/S: Windows 10 Pro
Location: Tampabay area of Florida
Posts: 2,277
Just curious as to how you made out with your hard drive problem, can you give an update as to whether or not Aomei Partition Assistant helped?
Reply With Quote
  #15  
Old November 14th, 2018, 11:11 PM
kuzzz's Avatar
kuzzz kuzzz is offline
CTH Subscriber
 
Join Date: May 2003
O/S: Windows 7 64-bit
Location: california
Posts: 1,562
I didn't use that program I used chkdsk /r it took a few hours, it didn't report any bad clusters. I think my bad cluster may be on my g drive. It was running ok. Turned it off went to bed and tried to boot it up in the morning and I could hear windows starting up but the screen was still back. I tried several times with no success and so I finally got it to boot up with my windows disk after several attempts. I haven't shut it down again since. Afraid it won't come back up.

kuzzz
Reply With Quote
Reply

Bookmarks

Topic Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT +1. The time now is 08:21 PM.